Silicon Photonics Components_绍兴中科通信设备有限公司





Please enter product name or model number you want and click OK to get the result!

首页

产品中心

光芯片

Silicon Photonics Components

Silicon integrated photonic devices / circuits are used in the next generation of high-bandwidth, low-power signal transmission important function devices will be widely used chip interconnect glazing, high-performance data centers and fiber to the home (FTTH) technology. Compared to other integrated devices, including the current large-scale adoption of a single device as well as silica-based planar waveguide technology, it has the following decisive advantages.

咨询留言

联系我们

电话：+86-575-88035326 邮箱：sales@zktel.com.cn

零售价

0.0

Yuan

市场价

0.0

Yuan

浏览量:

1000

产品编号

所属分类

光芯片

数量

库存:



产品描述

参数

Product description

Features:
• High-bandwidth integrated technology
• Ultra-low power integrated devices
• Highly integrated
• CMOS-compatible process
• Reduce the cost of the product

上一个

无

下一个

无

产品文档下载

暂时没有内容信息显示

在线咨询

一个好的企业需要更多的沟通，我们完全准备好用我们专业的产品知识和经验为您提供帮助。

留言应用名称：

产品表单

描述：

* 留言内容：

姓名：

Gender：

male

female

* 您的邮箱：

相关产品

暂时没有内容信息显示

25G PON ONU

25G PON ONU SFP28 transceiver modules are designed for use in 25G PON ONU links on up to 20km of single mode fiber. They are compliant with the IEEE 802.3ca SFF-8402.The optical transceiver is RoHS compliant.

25G PON OLT

25G PON OLT SFP28 transceiver modules are designed for use in 25G PON ONU links on up to 20km of single mode fiber. They are compliant with the IEEE 802.3ca ,SFF-8402.The optical transceiver is RoHS compliant.

40G QSFP+ PAM4

ZKTel ZDQD02H-DCM is a Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP+ Transceiver for InfiniBand QDR/DDR/SDR, 10G/8G/4G/2G fiber channel, PCIe and SAS Applications. The QSFP full-duplex optical module offers 4 independent transmit and receive channels, each capable of 11.2Gbps operation for an aggregate data rate of 40Gbps 2km using single mode fiber. These modules are designed to operate over single mode fiber systems using 1310nm DFB laser array. An optical fiber ribbon cable with an MPO/MTPTM connector can be plugged into the QSFP module receptacle. QSFP+ PSM IR4 is one kind of parallel transceiver which provides increased port density and total system cost savings.

40G QSFP+ SRBD

This transceiver is designed for use in 40 Gigabit Ethernet (40GE) applications over duplex multimode fiber. It is a high-performance 40GBASE-SR-BiDi QSFP+ optical Transceiver for 40G short-range duplex data communication and interconnects applications. This 40G transceiver operates on the wavelength of 832nm to 918nm via an LC connector and supports link lengths of 100m on OM3 multimode fiber or 150m on OM4 multimode fiber.

100G QSFP28 SRBD

The ZKTel 100G QSFP28 SRBD Transceivers Compatible 100GBASE-SR SWDM4 Bi-Directional QSFP28 transceiver is a pluggable optical transceiver with a duplex LC connector interface for short-reach data communication and interconnect applications using Multi-Mode Fiber (MMF). It offers customers a compelling solution that enables reuse of their existing 10 Gb duplex MMF infrastructure for migration to 100 Gigabit Ethernet connectivity.

100G QSFP28 SWDM4

The ZKTel 100G QSFP28 SWDM4 Optical Transceiver modules are designed for use in 100G Ethernet links over duplex multimode fiber. They are compliant with the QSFP28 MSA1 and IEEE 802.3bm CAUI-42 . Digital diagnostics functions are available via the I2C interface, as specified by the QSFP28 MSA1. The transceiver is RoHS-6 compliant per Directive 2011/65/EU3.

400G QSFP-DD ER8

ZDFS40L-DCL is designed for 40 km optical communication applications, and it is compliant with IEEE 802.3bs for 400GE Ethernet. This module contains 8-lane optical transmitter, 8-lane optical receiver and module management block including 2 wire serial interfaces. The optical signals are multiplexed to a single-mode fiber through an industry standard LC connector.

400G QSFP-DD PSM8

ZFFN02L-DCM is an Eight-Channel, Pluggable, Parallel, Fiber-Optic QSFP Double Density for 2x200 Gigabit Ethernet Applications. This transceiver is a high performance module for short-range multi-lane data communication and interconnection applications. It integrates eight data lanes in each direction with 8x26.5625GBd. Each lane can operate at 53.125Gbps up to 2km using G.652 SMF with KP-FEC. These modules are designed to operate over single mode fiber systems using a nominal wavelength of 1310nm. The electrical interface uses a 76 contact edge type connector. The optical interface uses a MPO16/MTP16 APC connector. The Common Management Interface Specification (CMIS) for QSFP DD modules. This module incorporates ZKTel proven circuit and EML technology to provide reliable long life, high performance, and consistent service.

400G QSFP-DD LR8

ZDFP10L-DCL is an Eight-Channel, Pluggable, Parallel, Fiber-Optic QSFP Double Density for 400 Gigabit Ethernet Applications. This transceiver is a high performance module for 10km multi-lane data communication and interconnection applications. It integrates eight data lanes in each direction with 8x26.5625GBd. Each lane can operate at 53.125Gbps up to 10km using G.652 SMF with KP-FEC. These modules are designed tO operate over single mode fiber systems using LAN-WDM 8 wavelengths. The electrical interface uses a 76 contact edge type connector. The optical interface uses duplex LC connector . The Common Management Interface Specification (CMIS) for QSFP DD modules, This module incorporates ZKTel proven circuit and EML technology to provide reliable long life, high performance, and consistent service.

400G QSFP-DD FR4

ZDFH02L-DCL is designed for use in 400 Gigabit Ethernet links on up to 2km of single mode fiber. They are compliant with the QSFP-DD MSA, IEEE 802.3cu and 100G Lambda MSA.The optical transceiver is RoHS compliant.

50G PON OLT

Z5D432052-ZCS 50G PON OLT QSFP28 transceiver modules are designed for use in 50G PON OLT links on up to 20km of single mode fiber. They are compliant with the ITU-T G.9804.3.The optical transceiver is RoHS compliant.

50G PON OUN

Z5D342025-ZCS 50G PON ONU QSFP28 transceiver modules are designed for use in 50G PON ONU links on up to 20km of single mode fiber. They are compliant with the ITU-T G.9804.x.The optical transceiver is RoHS compliant.

Combo PON OLT BOSA

The transmitter of this product integrates two high-speed DFB laser diodes with a wavelength of 1490nm and a working rate of 2.5Gb/s and a high-speed DFB laser diode with a wavelength of 1577nm and a working rate of 10Gb/s.

Combo PON ONU BOSA

This single-fiber optical sub-assembly is designed for High-speed transmission applications.It is integrated with one 9.953Gb/s 1270nm DFB LD, one 1.244Gb/s 1310nm DFB LD, one 9.953Gb/s 1577nm PD and one 2.488Gb/s 1490nm PD with APD TIA, and together with optical filters for beam direction.

GPON ONU BOSA

This single-fiber optical subassembly is designed for FTTx applications. It is integrated with one 1.25Gb/s 1310nm DFB LD and one 2.5Gb/s PIN-TIA together with optical filters for beam direction.

XGPON ONU SC/APC Pigtail BOSA

The BOSA is used for 1270nm Tx/1577(1575~1580nm) Rx 2.5Gbps/10Gb/s Diplexer Optical Module BOSA consists of 1270nm multi-quantum-well structured DFB laser diode, a 1577nm digital receiver integrated by a WDM filter. It is suitable for XGPON ONU transceiver module.

XGPON&GPON Combo OLT N1-B+

The Transceiver is a combination of XGS-PON OLT and GPON OLT optical transceiver in a SFP+ housing. It is designed to support both the XGS-PON OLT and the GPON OLT specifications over a single fiber via coarse wave division multiplexing. The XGS-PON bidirectional link is configured with 1270nm/1577nm optics and the GPON link is configured with 1310nm/1490nm optics. The 1270nm and 1310nm optical burst mode receivers incorporate APD/TIA optics for maximum sensitivity. The 10G transmitter incorporates a 1577nm EML laser assembly and the 2.5G transmitter incorporates a 1490nm DFB laser assembly. The transmitters can be controlled by the LVTTL Tx_DISABLE function and the receivers incorporates the LVTTL Rx_SD output.

100G CFP ER4

The ZKTel 100G CFP ER4 Optical Transceiver are designed for use in 100 Gigabit Ethernet links on up to 40km of single mode fiber. They are compliant with the CFP MSA, IEEE 802.3ba.The optical transceiver is RoHS compliant. Product Features Hot-pluggable CFP MSA form factor Supports up to 111.8Gb/s aggregate bit rate Power dissipation <16w Commercial case temperature range of 0°C to 70°C Single 3.3V power supply Maximum link length of 40km on Single Mode Fiber (SMF) Aligned with IEEE 802.3ba 4x25G EML LAN-WDM transmitter 10x10G NRZ retimed CAUI electrical interface Duplex LC receptacles MIDO management interface RoHS compliant Product Applications 100GBASE-ER4

200G QSFP56 LR4

ZKTel's 200G QSFP56 LR4 Transceiver is designed for use in 200 Gigabit Ethernet links on up to 10km of single mode fiber. They are compliant with the QSFP MSA and IEEE 802.3bs.The optical transceiver is RoHS compliant.

100G QSFP28 ZR4

ZDQR80J-DIL is designed for 80km optical communication applications. This module contains 4-lane optical transmitter, 4-lane optical receiver and module management block including 2 wire serial inter- face. The optical signals are multiplexed to a single-mode fiber through an industry standard LC connector.

100G QSFP28 ER4 Lite

This product is a 100Gb/s transceiver module designed for optical communication applications compliant to Ethernet 100GBASE-ER4 Lite standard. The module converts 4 input channels of 25Gb/s electrical data to 4 channels of LAN WDM optical signals and then multiplexes them into a single channel for 100Gb/s optical transmission. Reversely on the receiver side, the module de- multiplexes a 100Gb/s optical input into 4 channels of LAN WDM optical signals and then converts them to 4 output channels of electrical data.

40G QSFP+ LR4

This product is a parallel 40Gb/s Quad Small Form-factor Pluggable (QSFP+) optical module. It provides increased port density and total system cost savings. The QSFP+ full-duplex optical module offers 4 independent transmit and receive channels, each capable of 10Gb/s operation for an aggregate data rate of 40Gb/s on 10km of single mode fiber.

50G QSFP28 PAM4 ER4

The ZKTEL 50G PAM4 QSFP28 modules offer customers 50Gb/s electrical interface compliant with CEI- 28G-VSR standard for 50GAUI-2 with 2X25Gb/s high speed CML signal and 50Gb/s PAM4 optical interface, up to 40km reach on single mode fiber for 50G ER application.

400G QSFP-DD LR4

ZDFH10L-DCL is designed for use in 400 Gigabit Ethernet links on up to 10km of single mode fiber. They are compliant with the QSFP-DD MSA, IEEE 802.3bs and 100G Lambda MSA Group 400G-LR4-10.The optical transceiver is RoHS compliant.

400G QSFP112 SR4

ZDKAM1K-DCL is designed for use in 400 Gigabit Ethernet links on up to 100m of OM4 multi mode fiber. They are compliant with the QSFP112 MSA and IEEE 802.3db.The optical transceiver is RoHS compliant.

10G EPON ONU SFP+

10G EPON OLT SFP+

XGPON OLT SFP+

XGSPON E1 OLT SFP+

XGSPON N2 OLT SFP+

XGPON&GPON Combo OLT N2-C+

The Transceiver is a combination of XG-PON OLT and GPON OLT optical transceiver in an SFP+ housing. It is designed to support both the new ITU-T G.987.2 XG-PON and the legacy ITU-T G.984.2 GPON specifications over a single fiber via coarse wave division multiplexing.

25G SFP28 Tunable 10km

ZKTel’s ZD7L10Q-DBL is a tunable transceiver module designed for 10km optical communication applications, and it is compliant to SFP28 MSA standard. This module can convert a 25Gb/s electrical data to25Gb/s optical signals. Similarly, it a 25Gb/s optical input signal to 25Gb/s serial electrical data. It has been designed to meet the harshest external operating conditions including temperature, humidity and EMI interference. The module offers very high functionality and feature integration, accessible via a two-wire serial interface.

10G SFP+ Tunable 80km

ZD7M809-DBL is a tunable transceiver module designed for 80 km optical communication applications, and it is compliant to SFP+ MSA standard. This module can convert a 10 Gbps electrical data to 10 Gbps optical signals. Similarly, it can convert a 10 Gbps optical input signal to 10 Gbps serial electrical data. It has been designed to meet the harshest external operating conditions including temperature, humidity and EMI interference. The module offers very high functionality and feature integration, accessible via a two-wire serial interface.

10G SFP+ Tunable 40km

ZKTel’s ZD7L409-DBL is a tunable transceiver module designed for 40 km optical communication applications, and it is compliant to SFP+ MSA standard. This module can convert a 10 Gbps electrical data to 10 Gbps optical signals. Similarly, it a 10 Gbps optical input signal to 10 Gbps serial electrical data. It has been designed to meet the harshest external operating conditions including temperature, humidity and EMI interference. The module offers very high functionality and feature integration, accessible via a two-wire serial interface.

10/100/1000BASE-T SFP

10/100/1000 BASE-T copper Small Form Pluggable (SFP) transceivers are based on the SFP Multi Source Agreement (MSA).They are compatible with the Gigabit Ethernet and 1000BASE-T standards as specified in IEEE Std 802.3 . The 10/100/1000 BASE-T physical layer IC (PHY) can be accessed via I2C, allowing access to all PHY settings and features.

1000BASE-T SFP

The ZKTel's 1000BASE-T Copper Small Form Pluggable (SFP) transceivers are based on the SFP Multi Source Agreement (MSA) . They are compatible with the Gigabit Ethernet and 1000BASE-T standards as specified in IEEE Std 802.3 . The 1000BASE-T physical layer IC (PHY) can be accessed via I2C, allowing access to all PHY settings and features.



