产品中心
PON Products
25G PON ONU
25G PON ONU SFP28 transceiver modules are designed for use in 25G PON ONU links on up to 20km of single mode fiber. They are compliant with the IEEE 802.3ca SFF-8402.The optical transceiver is RoHS compliant.


25G PON OLT
25G PON OLT SFP28 transceiver modules are designed for use in 25G PON ONU links on up to 20km of single mode fiber. They are compliant with the IEEE 802.3ca ,SFF-8402.The optical transceiver is RoHS compliant.


50G PON OLT
Z5D432052-ZCS 50G PON OLT QSFP28 transceiver modules are designed for use in 50G PON OLT links on up to 20km of single mode fiber. They are compliant with the ITU-T G.9804.3.The optical transceiver is RoHS compliant.


50G PON OUN
Z5D342025-ZCS 50G PON ONU QSFP28 transceiver modules are designed for use in 50G PON ONU links on up to 20km of single mode fiber. They are compliant with the ITU-T G.9804.x.The optical transceiver is RoHS compliant.


XGPON&GPON Combo OLT N1-B+
The Transceiver is a combination of XGS-PON OLT and GPON OLT optical transceiver in a SFP+ housing. It is designed to support both the XGS-PON OLT and the GPON OLT specifications over a single fiber via coarse wave division multiplexing. The XGS-PON bidirectional link is configured with 1270nm/1577nm optics and the GPON link is configured with 1310nm/1490nm optics. The 1270nm and 1310nm optical burst mode receivers incorporate APD/TIA optics for maximum sensitivity. The 10G transmitter incorporates a 1577nm EML laser assembly and the 2.5G transmitter incorporates a 1490nm DFB laser assembly. The transmitters can be controlled by the LVTTL Tx_DISABLE function and the receivers incorporates the LVTTL Rx_SD output.


10G EPON ONU SFP+


10G EPON OLT SFP+


XGPON OLT SFP+


XGSPON E1 OLT SFP+


XGSPON N2 OLT SFP+


XGPON&GPON Combo OLT N2-C+
The Transceiver is a combination of XG-PON OLT and GPON OLT optical transceiver in an SFP+ housing. It is designed to support both the new ITU-T G.987.2 XG-PON and the legacy ITU-T G.984.2 GPON specifications over a single fiber via coarse wave division multiplexing.


XGSPON ONU Triplexer
ZKTel’s XGSPON ONU Triplexer Transceiver is designed for XGSPON transmission. The module incorporates a 10Gb/s 1270nm burst-mode transmitter, a 10Gb/s 1577nm continuous-mode receiver and a 1555nm PIN Analog CATV Receiver. They are compliant with the ITU-TG.9807,SFF-8472 and SFF-8472.The optical transceiver is RoHS compliant.


上一页
1
2
下一页
TOP






地址: 浙江省绍兴市袍江工业区三江路与袍中路交叉口

服务热线:
版权所有 (C) 绍兴中科通信设备有限公司
All Rights Reserved.