400G QSFP112 SR4_绍兴中科通信设备有限公司





Please enter product name or model number you want and click OK to get the result!

首页

产品中心

光模块

100G/200G/400G Transceivers

400G QSFP112 SR4

ZDKAM1K-DCL is designed for use in 400 Gigabit Ethernet links on up to 100m of OM4 multi mode fiber. They are compliant with the QSFP112 MSA and IEEE 802.3db.The optical transceiver is RoHS compliant.

咨询留言

联系我们

电话：+86-575-88035326 邮箱：sales@zktel.com.cn

零售价

0.0

Yuan

市场价

0.0

Yuan

浏览量:

1000

产品编号

所属分类

100G/200G/400G Transceivers

数量

库存:



产品描述

参数

Product Features

Hot-pluggable QSFP112 Type 1 form factor
Supports 425Gb/s aggregate bit rate
Power dissipation <10W
Commercial case temperature range of 0°C to 70°C
Single 3.3V power supply
Maximum link length of 100m on OM4 multiMode Fiber (MMF)
Aligned with IEEE 802.3db
4x100G PAM4 VCSEL-based 850nm transmitter
4x100G PAM4 retimed 400GAUI-4 electrical interface
MPO-12 receptacles
I2C management interface
RoHS compliant

Product Applications

400GBASE-SR4 Ethernet

上一个

400G QSFP-DD LR4

下一个

400G QSFP-DD SR8

产品文档下载

暂时没有内容信息显示

在线咨询

一个好的企业需要更多的沟通，我们完全准备好用我们专业的产品知识和经验为您提供帮助。

留言应用名称：

产品表单

描述：

* 留言内容：

姓名：

Gender：

male

female

* 您的邮箱：

相关产品

暂时没有内容信息显示

200G QSFP56 DR4

ZKTel's 200G QSFP56 DR4 Transceiver is designed to transmit and receive optical data links 53.125 Gbps bit rate per channel with PAM4 modulation format via up to 500m single mode fiber. It is hot pluggable transceiver with QSFP56 package. The module comprises high performance LD PIN DSP etc.

200G QSFP56 FR4

ZKTel's 200G QSFP56 FR4 Transceiver is designed to transmit and receive optical data links 50 Gb/s bit rate per channel with PAM4 modulation format via up to 2km single mode fiber. It is hot pluggable transceiver with QSFP56 package. The module comprises high performance LD PIN DSP etc.

40G QSFP+ LR4

This product is a parallel 40Gb/s Quad Small Form-factor Pluggable (QSFP+) optical module. It provides increased port density and total system cost savings. The QSFP+ full-duplex optical module offers 4 independent transmit and receive channels, each capable of 10Gb/s operation for an aggregate data rate of 40Gb/s on 10km of single mode fiber.

50G QSFP28 PAM4 ER4

The ZKTEL 50G PAM4 QSFP28 modules offer customers 50Gb/s electrical interface compliant with CEI- 28G-VSR standard for 50GAUI-2 with 2X25Gb/s high speed CML signal and 50Gb/s PAM4 optical interface, up to 40km reach on single mode fiber for 50G ER application.

400G QSFP-DD LR4

ZDFH10L-DCL is designed for use in 400 Gigabit Ethernet links on up to 10km of single mode fiber. They are compliant with the QSFP-DD MSA, IEEE 802.3bs and 100G Lambda MSA Group 400G-LR4-10.The optical transceiver is RoHS compliant.

400G QSFP112 SR4

10G EPON ONU SFP+

10G EPON OLT SFP+

XGPON OLT SFP+

XGSPON E1 OLT SFP+

XGSPON N2 OLT SFP+

XGPON Combo OLT C+

25G SFP28 Tunable 10km

ZKTel’s ZD7L10Q-DBL is a tunable transceiver module designed for 10km optical communication applications, and it is compliant to SFP28 MSA standard. This module can convert a 25Gb/s electrical data to25Gb/s optical signals. Similarly, it a 25Gb/s optical input signal to 25Gb/s serial electrical data. It has been designed to meet the harshest external operating conditions including temperature, humidity and EMI interference. The module offers very high functionality and feature integration, accessible via a two-wire serial interface.

10G SFP+ Tunable 80km

ZD7M809-DBL is a tunable transceiver module designed for 80 km optical communication applications, and it is compliant to SFP+ MSA standard. This module can convert a 10 Gbps electrical data to 10 Gbps optical signals. Similarly, it can convert a 10 Gbps optical input signal to 10 Gbps serial electrical data. It has been designed to meet the harshest external operating conditions including temperature, humidity and EMI interference. The module offers very high functionality and feature integration, accessible via a two-wire serial interface.

10G SFP+ Tunable 40km

ZKTel’s ZD7L409-DBL is a tunable transceiver module designed for 40 km optical communication applications, and it is compliant to SFP+ MSA standard. This module can convert a 10 Gbps electrical data to 10 Gbps optical signals. Similarly, it a 10 Gbps optical input signal to 10 Gbps serial electrical data. It has been designed to meet the harshest external operating conditions including temperature, humidity and EMI interference. The module offers very high functionality and feature integration, accessible via a two-wire serial interface.

10/100/1000BASE-T SFP

10/100/1000 BASE-T copper Small Form Pluggable (SFP) transceivers are based on the SFP Multi Source Agreement (MSA).They are compatible with the Gigabit Ethernet and 1000BASE-T standards as specified in IEEE Std 802.3 . The 10/100/1000 BASE-T physical layer IC (PHY) can be accessed via I2C, allowing access to all PHY settings and features.

1000BASE-T SFP

The ZKTel's 1000BASE-T Copper Small Form Pluggable (SFP) transceivers are based on the SFP Multi Source Agreement (MSA) . They are compatible with the Gigabit Ethernet and 1000BASE-T standards as specified in IEEE Std 802.3 . The 1000BASE-T physical layer IC (PHY) can be accessed via I2C, allowing access to all PHY settings and features.

400G QSFP-DD SR8

ZFFAM1L-DCM is a hot-pluggable QSFP-DD transceiver for 400G links over multimode fiber. It is high performance module for short-range data communication and interconnect application which operate at 400Gbps up to 70m using OM3 multimode fiber or 100m using OM4 multimode fiber. This module is designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The electrical interface uses a 76 pins connector. The optical interface uses MPO connector.

400G QSFP112 FR4

The 400G QSFP112 FR4 Transceiver is designed to transmit and receive optical data links 106.25 Gbps bit rate per channel with PAM4 modulation format via up to 2km single mode fiber. It is hot pluggable transceiver with QSFP112 package. The module comprises high performance LD PIN DSP etc.

400G QSFP112 DR4

The 400G QSFP112 DR4 Transceiver is designed to transmit and receive optical data links 106.25 Gbps bit rate per channel with PAM4 modulation format via up to 500m single mode fiber. It is hot pluggable transceiver with QSFP112 package. The module comprises high performance LD PIN DSP etc.

200G QSFP-DD SR8

This product is a QSFPDD Optical transceiver for 8 x25 Gb/s optical links. It operates at 25.78125Gb/s up to 70m over OM3 multimode optical fiber and 100m over OM4 fiber. The optical transmitter portion of the transceiver incorporates two 4 channels VCSEL array, two 4 channels input buffer and laser driver, diagnostic monitors, control and bias blocks. For module control, the control interface incorporates a Two Wire Serial interface of clock and data signals. Diagnostic monitors for VCSEL bias, module temperature, TX power，RX power and supply voltage are implemented and results are available through the Two Wire Serial interface. Alarm and warning thresholds are established for the monitored attributes. Flags are set and interrupts generated when the attributes are outside the thresholds. All flags are latched and will remain set even if the condition initiating the latch clears and operation resumes. The optical output will squelch for loss of input signal unless squelch is disabled.

BoB 10G PON光猫智能调测系统

目前GPON、EPON、10G EPON、XGPON1、XGSPON等光猫用量越来越大，而随着成本的压力，很多公司都在切换BoB的方案，即BOSA on Board的方案，来替代目前普遍用到的光模块方案。显然，BoB有很大的市场以及可以降低成本的地方，最直接的作用，就是相当于省掉了结构件，PCB板子等，同时，消减了模块的利润。

100G CFP4 LR4

ZKTel's 100G CFP4 LR4 optical Transceiver integrates receiver and transmitter path on one module. In the transmit side, four lanes of serial data streams are recovered, retimed, and passed to four laser drivers. The laser drivers control four EMLs (Electric-absorption Modulated Lasers) with center wavelength of 1296 nm, 1300nm, 1305nm and 1309 nm. The optical signals are multiplexed to a single –mode fiber through an industry standard LC connector. In the receive side, the four lanes of optical data streams are optically de-multiplexed by the integrated optical de-multiplexer. Each data stream is recovered by a PIN photo-detector and trans-impedance amplifier, retimed. This module features a hot-pluggable electrical interface, low power consumption and MDIO management interface.

UC LWDM 12CH Module

ZKTel’s 12 CH UC LWDM has a 22.6*18*6.5mm small package size and 2.2 dB low insert loss at industrial temperature range. It adopts Free-Space technology. Inside the device, adjacent signal channels are cascaded by parallel beam instead of the routing fiber, thus the reliability is significantly improved. UC LWDM Mux Demux is usually integrated inside LWDM transceiver for its small footprint and also used 5G fronthaul network where wavelengths are packed tightly together over the O-band, up to 12 wavelengths in 800GHz grid.

XGSPON ONU Triplexer

ZKTel’s XGSPON ONU Triplexer Transceiver is designed for XGSPON transmission. The module incorporates a 10Gb/s 1270nm burst-mode transmitter, a 10Gb/s 1577nm continuous-mode receiver and a 1555nm PIN Analog CATV Receiver. They are compliant with the ITU-TG.9807,SFF-8472 and SFF-8472.The optical transceiver is RoHS compliant.

GPON ONU Triplexer

ZKTel’s Triplex burst mode ONU transceiver is designed to be compliant with the point to multipoint (P2MP) optical network transmission. It is compliant with ITU-T G.984.5 standard. The module consists of 1310nm un-cool DFB laser, InGaAs/InP APD, Preamplifer, analog PD and WDM filter in a highly-integrated three-wavelength optical sub-assembly, and it receives up to 2.5Gbps of continuous data at 1490nm,and transmits 1.25Gbps of burst-mode data at 1310nm. It also supports third wavelength to receive analog RF video at 1555nm. The optical RF Video receiver consists of a wideband video amplifier that operates from 40MHz to 870MHz and supports up to 110 TV channels.

100G QSFP28 ER4

This product is a 100Gb/s transceiver module designed for optical communication applications compliant to Ethernet 100GBASE-ER4 Lite standard. The module converts 4 input channels of 25Gb/s electrical data to 4 channels of LAN WDM optical signals and then multiplexes them into a single channel for 100Gb/s optical transmission. Reversely on the receiver side, the module de- multiplexes a 100Gb/s optical input into 4 channels of LAN WDM optical signals and then converts them to 4 output channels of electrical data.

XGSPON Combo OLT C+

GPON OLT SFP Class C+++

GPON OLT SFP Class C++

EPON OLT SFP PX20+++

EPON OLT SFP PX20+

GPON Tri-OSA

The BOSA is used for 1310nm Tx/1490(1480~1500nm) Rx 1.244Gbps/2.488Gb/s/1550nm Analog Rx Triplexer Optical Module OSA consists of 1310 nm multi-quantum-well structured DFB laser diode, a 1490 nm digital receiver and a 1550nm analog receiver integrated by a WDM filter. It is suitable for passive optical network transceiver in ONU equipment of FTTP systems.

BoB GPON光猫智能调测系统

100G 误码仪

100G误码测试仪是一款4通道、高速率的高性能误码分析仪器。该仪器可同时提供4个通道进行误码测试，每个通道均支持10G/25G多种速率，并有多种码型可选，支持用户自定义码型设置；输出信号幅值可调、极性可自由翻转，支持定时和连续两种测试模式，配备7寸高清晰度触控显示，方便操作。

XGSPON ONU SCAPC Pigtail BOSA

The BOSA is used for 1270nm Tx/1577(1575~1580nm) Rx 9.953Gbps/9.953Gb/s Diplexer Optical Module BOSA consists of 1270 nm multi-quantum-well structured DFB laser diode, a 1577nm digital receiver integrated by a WDM filter. It is suitable for XGSPON ONU transceiver module.



